IP Camera is being used to view what’s happenning in your home when you are not at home but working in the office, or in a wifi coffee shop, or when you are away traveling around for business trip or leisure. You can install the IP CAM on the ceilling of your living room, any spot which you wish to or even in your or in your garage. You will be connected to the IP CAM at your home and to your to your home network either through wired internet or WiFi. Since most of the home network supports DHCP, the IP CAM connected to the Internet. Now, you think that you can see the video of the IP CAM. But actually, you have not completed the installation. If your are in the office or wifi coffee shop,and would like to view your IP CAM video, you need to know the IP address or domain name of the IP CAM. As such, you need to figure out what's the meanings of these terms like DDNS, public/private IP ,virtual servers, port mapping.....etc. After having spent some time and hard works, you will tend togive up because it's very not easy to do so on your own. However, with the use of SirieSoft IPcamera, a mere plug and play concept, you only need to remember the ID/password of the IP CAM. You can then see the IP CAM video any where in the world. It's just this simple and easy. It is very easy to see the IP CAM video,but not to worry too much as it is password protected. As long as you keep your password with full confidentiality, no other person will be able to see your IP CAM video without your consent. The video is compressed using the MPEG4 compression technology. This is a very high efficient compressed standard. The quality of the video 320x240 resolution is very good if the bandwidth is more than 256kbps. Futhermore this bandwidth is simple and easy for home internet connection. The video quality is good when you are using ADSL or cable modem.